Refco DIGIMON4 Installations- Und Bedienungsanleitung Seite 13

Instruction Manual DIGIMON-SE / DIGIMON4 English
External vacuum sensor (optional)
The external vacuum sensor should be used to measure exact vacuum values. The
sensor should be connected to the system.
Vacuum display
Select pressure unit
+
SET
R
Hold down the button. Use the button to select the desired unit.
Release both buttons.
SET VAC
Save value (current measurement value): press the and buttons at the
same time
VAC
Retrieve memory value: press the button for 3 seconds (display freezes)
VAC
Clear display: press the button for 3 seconds  saved value is no longer visible
SET LIGHT
Delete memory value: press the and buttons at the same time.
11