Silit Sicomatic econtrol Bedienungs- Und Pflegehinweise Seite 86

How to solve the problem
→ Turn down the power setting.
→ Remove the lid shaft handle and clean the valve area (see Point 10.2 "Cleaning the lid and lid shaft handle").
→ Clean the overpressure valve area. Steam continues to be released despite cleaning.
→ Fit a new original Sicomatic® econtrol overpressure valve (see Chapter 11 "Maintenance").
→ Remove the lid shaft handle and clean the valve area (see Point 10.2 "Cleaning the lid and lid shaft handle").
→ Contact your Silit dealer.
→ Fit a new original Sicomatic® lid gasket.
→ Try turning the selector to cooking level II. If the steam stops, this means that the power setting was too high for
cooking level I.
Steam continues to be released despite setting to cooking level II:
→ Remove the lid shaft handle and clean the valve area (see Point 10.2 "Cleaning the lid and lid shaft handle").
→ Contact your Silit dealer.
→ Fit a new original Sicomatic® econtrol aroma sealing cap (see Chapter 11 "Maintenance").
→ Contact your Silit dealer.
→ Fit a new original Sicomatic® econtrol aroma sealing cap (see Chapter 11 "Maintenance").
→ Position the aroma sealing cap correctly.
→ Release the steam or allow to cool. Never use force to open the cooker.
→ Release the stop by gently moving the selector back and forth.
EN
35