Cleaning And Care; Cleaning The Milk Nozzle And Milk Tank - Silvercrest SEMM 1470 A1 Bedienungsanleitung

12) Fill the water tank
appliance again.
13) Brew 2 "Double" espressos and 2 "Large" lattes so that the pipes are rinsed
out with clear water.
The appliance can now be used again as normal. After another 500 uses the
descaling warning will be shown again.

Cleaning and care

WARNING – RISK OF INJURY!
■ Always remove the plug from the mains power socket before you clean the
appliance. Danger of electric shock!
Never immerse the appliance in water or other
liquids. Danger of electric shock!
■ Always allow the appliance to cool down before cleaning it. Risk of burns!

Cleaning the milk nozzle and milk tank

CAUTION – PROPERTY DAMAGE
■ Never use abrasive, aggressive or chemical cleaning agents to clean the
appliance. These could damage the outer surfaces of the appliance.
1) Switch the appliance off using the on/off switch
from the wall socket.
2) Remove the milk tank
3) Clean the milk tank lid
mild washing-up liquid.
4) Rinse both parts off with clear water and then dry them well.
5) Fill the milk tank
and push the milk tank
■ 56 │ GB │ IE
with clear water up to the MAX mark and insert it in the
from the appliance and take off the milk tank lid
and the milk tank
with water (approx. 100 ml), replace the milk tank lid
back into the appliance.
and pull the mains plug
in warm water with a little
SEMM 1470 A1
.