Silvercrest SEMM 1470 A1 Bedienungsanleitung Seite 60

6) Place a suitably large, empty container onto the drip grille
milk nozzle
7) Insert the plug into a mains power socket and switch on the appliance using
the on/off switch
8) Wait until all control lamps light up permanently.
9) Set the "Milk quantity" knob
10) Press the "Large" latte button
the "Large"
"Large"
steam comes out of the milk nozzle
11) Wait until no more steam comes out of the milk nozzle
stop the cleaning process at anytime, press the "Large" latte button
12) Remove the milk tank
13) Switch the appliance off using the on/off switch
NOTE
► If you want to descale the milk nozzle
standard commercial descaler for coffee machines to the milk tank
proceed as described above. You should also observe the instructions for
the descaler.
► After descaling, clean once again using clean water only.
NOTE
► The milk tank
the milk tank
For additional cleaning, you can remove the milk nozzle
1) Take off the milk tank lid
2) Move the milk nozzle
is pointing directly upwards.
SEMM 1470 A1
so that it points into the container.
.
to the position "Clean"
2x in a row. The control lamps of
and "Small" cappuccino buttons
and "Small" latte buttons
and empty out any remaining water.
is suitable for cleaning in the dishwasher. Make sure that
does not get jammed in the dishwasher.
.
into an upright position so that the milk nozzle lever
.
, as well as the
flash alternately and hot
.
. If you want to
.
and the milk tank
:
GB │ IE
and move the
.
add a little
and
│ 57 ■