Adding Espresso Powder; Inserting The Sieve Holder - Silvercrest SEMM 1470 A1 Bedienungsanleitung

Adding espresso powder

1) Fill the small espresso sieve
This corresponds to around 7 g of powder or a level measuring spoon
Or...
Fill the large espresso sieve
This corresponds to around 7 g + 7 g of powder or two level measuring
spoons
2) Push down the espresso powder using the compactor on the measuring
spoon
is filled up to the Max marking. Then compact the espresso powder again.
NOTE
► Compacting the espresso powder is a fundamentally important process
during the preparation of an espresso. If the espresso powder is compacted
very strongly, the espresso runs through more slowly and there is more
crema. If the espresso powder is not so strongly compacted, the espresso
runs through more quickly and it creates very little crema.

Inserting the sieve holder

1) Insert the sieve holder
appliance by inserting it at the "
turning it anticlockwise until the handle of the sieve holder
the "
NOTE
► To remove the sieve holder
to the "
■ 44 │ GB │ IE
.
. Add more espresso powder, if required, until the espresso sieve
together with the espresso sieve (
" symbol.
" position to prevent any coffee from spraying out.
to the Max marking with espresso powder.
to the Max marking with espresso powder.
" marking on the appliance and then
after preparing a drink, turn it slowly back
.
or ) in the
is pointing to
SEMM 1470 A1