Silvercrest SEMM 1470 A1 Bedienungsanleitung Seite 55

7) Use the "Milk quantity" knob
latte macchiato. Turn the "Milk quantity" knob
of milk. Turn the "Milk quantity" knob
of milk. Make sure you do not turn the knob further than the "
Otherwise you will be in cleaning mode (see section "Cleaning and care").
NOTE
► You can even correct the amount of milk during preparation by turning the
"Milk quantity" knob
8) Switch the appliance on using the on/off switch
lamps light up permanently. The appliance has now heated up.
9) Press the "Small" latte button
chiato. The control lamp for the "Small" latte button
Press the "Large" latte button
chiato. The control lamp for the "Large" latte button
10) The appliance starts the brewing process; the corresponding control lamp
flashes during the preparation.
11) Wait until the espresso has stopped flowing out of the espresso outlet
milk has stopped flowing out of the milk nozzle
up. You can now remove your latte macchiato.
NOTE
► You can stop the preparation at any time by pressing any button.
NOTE
► If you want to add a little extra frothed milk to your drink: Press the "Large"
cappuccino button
cappuccino button
button
Stop the milk output by pressing any button. The milk will stop coming out
automatically after 70 seconds.
■ 52 │ GB │ IE
to set how much milk you want to use for your
.
if you want to prepare a small latte mac-
if you want to prepare a large latte mac-
2x in a row. The control lamp for the "Small"
and the control lamp for the "Large" cappuccino
light up and frothed milk comes out of the milk nozzle
to the left to reduce the amount
to the right to increase the amount
and wait until all control
lights up.
lights up.
and all control lamps light
SEMM 1470 A1
" marking.
, the
.