Charging The Spare Battery; Information On Battery Use - Funkwerk FC3 Kurzanleitung

Putting into operation
Charger DC4 Standard

Charging the spare battery

A bay which can be closed with a cover and which is intended for charging a
spare battery is provided on the rear of the Desktop Charger DC4 Plus.
Open the covwer (lid) of the Desktop
Charger DC4 Plus (1).
Place a battery with a contact faces fa-
cing the charger housing into the bay (2)
and press it gently against the contact
springs in the bay.
As soon as the contact is provided and
charging starts, the LED at the bottom
front of the charger lights up red.
When the battery is fully charged, the
LED colour changes from red to green.
The LED goes out after removing the battery.

Information on battery use

After installing a battery, place the handset into the charger until the battery
symbol lights up green. The battery is now fully charged.
94
Charger DC4 Plus
2
FC3‚ FC3 L
1