Emergency Call Number > Gap (Setting Up An Emergency Call); Setting Up A Position Alarm For Triggering An Emergency Call - Funkwerk FC3 Kurzanleitung

FC3‚ FC3 L
Emergency call number > GAP (Setting up an emergency call)
When setting up an emergency call, proceed as follows:
Call up Menu > Set up > Phone settings, then ...
Call up the «Emergency number» entry.
Enter the current PIN code with the number keys (when delivered,
the personal identification number (PIN) is «0000»).
Accept the entered PIN with the R
Using the Up and Down arrows of the S
entry, e.g. GAP.
Accept the entry of the selected system, e.g. «GAP» or the edited
(modified) «GAP system name» by pressing the R
Using the Up and Down arrows of the S
in an existing call number and position it to the right of a digit to be
deleted when needed.
When needed, delete the existing emergency number in part (by
pressing the L
the L
EFT
Enter the (new) emergency number with the number keys.
Accept the emergency number entry with the R
Go back one level to the «Emergency number» entry by briefly pres-
sing the L
pressing the L

Setting up a position alarm for triggering an emergency call

NOTE
The phone setting menu item of setting up a 'Position alarm' is avai-
lable only with handsets referred to as FC3 L, being equipped with an
integrated posiion sensor.
The configuration of the position alarm may be blocked by assigning a
Secury PIN In this case contact your system administrator.
S
EFT OFTKEY
S [Delete] long).
OFTKEY
S or go back to the basic status (idle display) by
EFT OFTKEY
S
EFT OFTKEY
S
IGHT
[Delete] briefly) or completely (by pressing
long.
[OK].
OFTKEY
K , select a system
ELECTOR EY
S
IGHT
K , move the cursor
ELECTOR EY
S
IGHT OFTKEY
Annex
[OK].
OFTKEY
[OK].
133