Inserting The Mem Card; Removing The Mem Card - Funkwerk FC3 Kurzanleitung

FC3‚ FC3 L

Inserting the MEM card

First press the small MEM card out of the larger frame with your finger (see
figure on the left).
-
räg unter die
Slide the edge of the MEM card obliquely under the holding points a at the
narrow side of the MEM card compartment (1).The gold-coloured contacts
of the MEM card must face downwards!
Press the MEM card down until the small lug b grips (2). The lug is always
located opposite of the holding points.

Removing the MEM card

You only need to remove the MEM card before you give away your handset or
if you need your MEM card to operate a new handset.
Remove the rechargeable battery from the handset (see page 92).
Move the lug b gently away from the MEM card to release the card. Then
lift the MEM card.
Remove the MEM card from its holder.
Do not use any pointed or sharp objects (tools) for removing and changing
the MEM card!
ausnehmen
Putting into operation
2
1
b
a
91