Using The Scales - Bosch OptiMUM MUM9 Serie Gebrauchsanleitung

en

Using the scales

– SensorControl Plus cannot produce
optimum results unless the eggs are
fresh or the cream has been cooled
(approx. 6 °C).
– Cream which was previously frozen
cannot be whipped.
– Cream which contains additives or
lactose-free cream can not produce
ideal results.
– Do not add sugar, flavours or other
additives for cream or beaten egg white
until SensorControl Plus is complete.
– Turn the rotary switch to y to cancel
SensorControl Plus. A slight resistance
must be overcome for this.
– If the result is not how you wish it to be,
turn the rotary switch to setting 7 (for
cream and beaten egg white) or setting
3 (for yeast dough) and continue to
process the ingredients until the desired
consistency is achieved.
– Do not start SensorControl Plus a
second time with ingredients which have
already been processed.
Example: Making beaten egg
white with SensorControl Plus
X Image sequence J
1. Prepare the base unit and insert the
professional stirring whisk.
2. Press the release button and push the
swivel arm down until it locks into place.
3. Plug the mains plug into the mains.
"OptiMUM" appears on the display.
4. Separate the eggs (2-12 eggs).
5. Press button D. "CREAM" appears on
the display.
6. Press button +. "EGG WHITE" appears
on the display.
7. Add the egg white to the bowl. "TURN
SWITCH TO M/A" appears on the display.
8. Turn the rotary switch to ü and hold
it briefly.
9. "SENSOR CONTROL Plus" appears
on the display. SensorControl Plus
monitors the processing.
32
10. Once the pre-programmed consistency
has been achieved, an acoustic signal
will sound and processing will stop.
"FINISH" appears on the display.
11. The rotary switch automatically switches
to y. "OptiMUM" appears on the
display.
12. Disconnect the mains plug.
13. Processing with the "EGG WHITE"
function is ended.
Clean all parts immediately after use.
X "Cleaning and maintenance" see
page 34
Using the scales
Depending on the model in question, the
appliance may be equipped with scales.
The following applications are possible:
– Weighing the added ingredients
(either each ingredient individually or all
ingredients together).
– Pre-setting a desired weight and
counting down until sufficient ingredients
have been added (with audible
information signals).
Important:
– Press button A to leave the weighing
function again. "OptiMUM" appears on
the display.
– The appliance has 4 weight sensors
in the feet. The scales only supply
the correct results if all of the feet are
standing on a solid and level surface.
Do not put any cloths or other items
underneath.
– After switching on or resetting the
scales, they are calibrated for a brief
moment (tare). During this process, do
not touch the appliance or place any
items on top of it (e.g. wooden spoon,
tea towel etc.).
– Ensure that measuring jugs or
packaging are not lying on top of the
appliance (e.g. on the edge of the filling
shaft).