Overload Protection; Before Using The Appliance; Basic Operation - Bosch VeggieLove MUZ5VL1 Gebrauchsanleitung

en Before using the appliance
4.4 Overload protection
The overload protection system pre-
vents the motor and other compon-
ents from being damaged through
being overloaded.
If the continuous feed shredder is
overloaded or blocked, the disc
holder shaft will break at the prede-
termined breaking point.
Note: Spare parts with a predeter-
mined breaking point are not covered
by our warranty obligations. A new
disc holder is available from cus-
tomer service under order number
00630760.
5 Before using the appli-
ance
Prepare the base unit and the ac-
cessories for use.
5.1 Overview of base units
This accessory can be used with dif-
ferent base units.
You can prepare your kitchen ma-
chine as shown.
→ Fig.
3
A
Kitchen machine from the
MUMS4 or MUM5 series
B
Kitchen machine from the
MUMS2 series
5.2 Assembling the continu-
ous feed shredder
Grip the disc holder level with the
1.
wings.
→ Fig.
4
The two plastic tips must point up.
18
Take hold of the required cutting
2.
disc by the edge and fit onto the
disc holder with the side you re-
quire facing up.
Fit single-sided discs with the
‒
blades or serrations facing up.
Fit reversible discs with the re-
‒
quired marking facing up.
→ Fig.
5
Insert the disc holder with the cut-
3.
ting disc into the housing.
→ Fig.
6
Place the lid on the housing.
4.
→ Fig.
7
Markings and
up.
Rotate the lid clockwise until it en-
5.
gages.
→ Fig.
8
Markings and
up.
5.3 Fitting continuous feed
shredder onto the base
unit
Place the continuous feed shred-
1.
der on drive 2 as shown.
→ Fig. 9
Push the continuous feed shredder
2.
down and rotate clockwise until it
engages.
→ Fig.
10
The continuous feed shredder
must be securely connected to the
base unit.
6 Basic operation
ope r a t i o n
ope r a t i o n
6.1 Processing food with the
continuous feed shredder
Note: Take note of the recommended
speeds.
→ "Application examples", Page 20
must match
must match