Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
F r e e - s t a n d i n g a p p l i a n c e
enTable of Contentse n I n s t a l l a t i o n i n s t r u c t i o n s
Transporting
ã=
Caution
When transporting and installing the
appliance, handle the appliance doors
carefully. The glass front may shatter!
Using the installation
instructions
Please fold out the illustrated last page.
These installation instructions refer to
several models.
The diagrams may differ.
Installation location
A dry, well ventilated room is suitable as
an installation location. The installation
location should not be exposed to direct
sunlight and not placed near a heat
source, e.g. a cooker, radiator, etc. If
installation next to a heat source is
unavoidable, use a suitable insulating
plate or observe the following minimum
distances from the heat source:
3 cm to electric or gas cookers.
■
30 cm to an oil or coal-fired cooker.
■
The floor of the installation location must
not give way; if required, reinforce floor. If
the floor is uneven, compensate with
supports.
Distance from wall
If appliances feature a glass front, the
hinge side must be at least 40 mm from
the wall to ensure that the doors can
be opened by 90°.
en
7
Werbung
Inhaltsverzeichnis
