Using Without Additional Functions; Operating The Appliance; Adding More Ingredients - Bosch OptiMUM MUM9 Serie Gebrauchsanleitung

Using without additional
functions
W Risk of injury!
– Do not insert the mains plug until
all preparations for working with the
appliance are complete.
– While operating the appliance, never
reach into the bowl or filling shaft.
– Do not operate the appliance without
the cover in place.
– Always wait for the drive to come to a
standstill before moving the swivel arm
or changing tools.
– For safety reasons, always fit the
protective drive covers on the front and
rear drive.
Important:
– Prepare the base unit as described
under "Preparation".
– The appliance cannot be switched on
unless the bowl has been inserted
correctly.
Note: The function "TIME" starts
automatically with every use, counts the
ongoing processing duration and indicates
this on the display.
X Image sequence F
1. Depending on the processing task,
select the professional flexible beating
whisk, professional stirring whisk
or kneading hook (X "Tools" see
page 27), align the lever on the
protective cap to the front and insert the
tool in the main drive until it locks into
place.
2. Put the ingredients to be processed in
the bowl.
3. Press the release button and push the
swivel arm down until it locks into place.
W Risk of injury!
Carefully lower the swivel arm! Make
sure you do not get your hands or fingers
caught.

Using without additional functions

Operating the appliance

4. Plug the mains plug into the mains.
"OptiMUM" appears on the display.
5. Set the rotary switch to the required
setting (X "Recommended speeds"
see page 27). "TIME" appears on
the display and the elapsed processing
duration is displayed.
6. Process the ingredients until you
achieve the required result.
7. Turn the rotary switch to y. Wait
until the drive comes to a standstill.
Disconnect the mains plug.
8. Press the release button and raise
the swivel arm to the stop.
9. Turn the bowl clockwise until it can be
raised. Remove the bowl.
10. Press the lever on the protective cap
down until the tool is released. Take the
tool out of the drive.
11. Take the cover off the drive.
Clean all parts immediately after use.
X "Cleaning and maintenance" see
page 34
Note: Please also use our application
examples to familiarise yourself with
your new appliance and its functions.
X "Recipes" see page 34

Adding more ingredients

More ingredients can also be added during
processing.
X Fig. G
■ While the appliance is running, carefully
add more ingredients through the filling
shaft in the cover.
W Risk of injury!
While operating the appliance, never reach
into the bowl or filling shaft with your hands.
Do not insert any objects (e.g. wooden
spoon) into the bowl or filling shaft.
en
29