Function Buttons - Bosch OptiMUM MUM9 Serie Gebrauchsanleitung

en Parts and operating controls
Display
X Fig. A
Settings, information, error messages and
values are indicated on the display. Here,
long texts will run from right to left in order
to display them fully.
Example:
YEAST DOU
TURN SWITCH T
AST DOUGH
SWITCH TO M/A
The language in which the text is displayed
can be changed. X "Basic settings" see
page 28

Function buttons

X Fig. A
The appliance has 3 to 5 function buttons
(depending on the model), using which
special additional functions and automatic
programmes can be selected and adjusted.
Buttons
SensorControl Plus/Programme
D*
selection
A*
Timer/Selection/Back
C*
Scales/Tare
-
Reduce selection/values
+
Increase selection/values
* Depending on the model
Note: The buttons are operated by gently
touching them with your finger. Wearing
kitchen gloves may impair the function of
the buttons. It is not possible to operate
buttons with objects (e.g. wooden spoon).
26
GH
O M/A
Rotary switch with
illuminated ring
X Fig. B
The rotary switch is used to select
the required speed, start an automatic
programme or to switch the appliance
off. The integrated illuminated ring lights
up during operation. The appliance will
no longer switch on if there is an error in
appliance operation, if the electronic fuses
trip or the appliance has a defect, and the
illuminated ring will light up.
Settings
ü The setting ü has various
functions:
Without automatic programme =
M: Instantaneous switching
at maximum speed/fast. Hold down
switch for the required duration.
With automatic programme =
A: Automatic regulation of the
duration. After activating the
automatic setting, set the switch
to ü and hold it briefly. The
switch will remain set to ü and
will revert back to y after the
automatic programme has ended.
The appliance is switched off.
X "Using SensorControl Plus" see
page 31
Stop/Switch off
y
Function "Folding in" at minimum
z
speed/very slow
1...7 Speed settings
1: low speed/slow
7: maximum speed/fast