First Use; Setting Up - Silvercrest SNAW 1000 D2 Bedienungsanleitung

Check the condition of the batteries at regular intervals. Leaking
■
batteries can cause injuries as well as damage to the appliance.
Always use protective gloves when handling leaking batteries!
■
Clean the battery and appliance contacts with a dry cloth. Do
not let the chemicals get into contact with your skin and mucous
membranes, especially your eyes. In the event of exposure to the
chemicals, wash the affected area with plenty of water and seek
medical advice immediately.

First use

■ Remove all packaging materials from the appliance. Remove the protective
film from the display 3. The transport restraint that prevents the weighing
platform 1 from being pushed down must be removed from under the
weighing platform 1.
■ Open the battery compartment 2 on the underside of the scale and remove
the small plastic strip from between the batteries and the contacts, then close
the battery compartment 2 so that the battery compartment cover clicks into
place.
■ The scales can display weights in g (grams) and kg (kilograms) or in oz
(ounces) and lb (pounds). Press the UNIT button 8 to change the weight
unit. The examples in these instructions always use the unit g (grams).

Setting up

Place the scales on a level, firm surface. Correct measurement requires a firm
base, as the weight sensors are installed in the 4 silicone feet.
NOTE
► This appliance is provided with non-slip silicone feet. Furniture surfaces may
be made of a variety of materials and are treated with many different types
of cleaning agents. Therefore, it is not possible to entirely exclude the pos-
sibility that some of these materials contain substances that could corrode
and soften the appliance's silicone feet. If need be, place an anti-slip mat
under the silicone feet of the appliance.
SNAW 1000 D2
GB │ MT │ 125 ■