C) Possible Errors During Response; D) Possible Errors During "Incall; E) Possible Errors Of Temp1-4 - Conrad GX106 Bedienungsanleitung

c) Possible Errors during Response

No phone number displayed in the status:
Activate caller ID transmission in the mobile phone
SMS arrives but response is not sent:
Wrong phone number entered
Caller ID transmission deactivated
SMS sent from another mobile phone or configuration not transmitted
Wrong spaces, the 8 characters not complied with or capitalisation not complied with
(try assigning a message text with 8 characters like "answerme" or "reportit" and test
again.
Not enough credit on the prepaid card

d) Possible Errors during "INCALL"

Message "Participant not available"
Module has not logged on to the GSM network yet: Wait briefly until the module has
logged on or move the aerial to another place
No phone number displayed in the status
Activate caller ID transmission in the mobile phone
Message "No caller authorisation"
Enter wrong phone number
Caller ID transmission deactivated
Called from another mobile phone or configuration not transmitted

e) Possible Errors of TEMP1-4

Signal is not recognised
Duration too short: Signal must be present for about 3 seconds before it is recognised.
Signal is recognised, status also indicates, e.g. T1=86C, but does not send SMS
Signal was applied right after switching on: The module will only check for changes
at the inputs after approx. 1 minute. Therefore disconnect the signal, wait for a
moment and connect it again.
Not enough credit on the prepaid card
93