Scope Of Delivery - Conrad GX106 Bedienungsanleitung

4. Scope of Delivery

• GSM module
• Control software
• USB cable
• GSM aerial
• Closing plug
• Operating instructions (on CD)
The following components not included in the delivery of the GSM module are also
required for assembly and operation:
• An activated SIM card from any provider
• A mobile phone without Sim lock (to configure the SIM card of the GSM module)
• Power supply 5 - 30 V/DC, 1 A (e.g. solar rechargeable battery or stabilised mains adapter)
• Suitable connection lines for supply voltage and connection of the in- and outputs
• Optionally, depending on use of the in- and outputs, you additionally need up to 7 relays
(Conrad item no. 502892) or relay PCBs (Conrad item no. 585498)
• Optionally, depending on use of the in- and outputs, you need 1 or 2 temperature sensors
(e.g. Conrad item no. 198896)
• Optionally, when using the PWM output, you need a suitable servo motor. To define the
precise adjustment points of the servo motor, an oscilloscope is required additionally.
55