Sending An Email To A Mobile Phone - Conrad GX106 Bedienungsanleitung

j) Sending an Email to a Mobile Phone
After activation, the mobile phone receives an own email address from the provider in the form
of "phone number@mailserver". The email must be sent to this address; e.g., by sending an
email to the vodafone D2 address "0172xxxxxxx@vodafone-sms.de".

The mobile phone owner pays the transmission costs for sending and receiving the
emails at the price of an SMS. A fax costs slightly more, depending on the provider.
Received SMS texts comprising more than 160 characters are either shortened or
distributed to several SMS.
You can also have this service blocked again. To do so, send an SMS with the text
"Deactivate email" to the provider's gateway number.
The phone number must be transmitted so that the module can "see" who called or sent an
SMS! Refer to the manual of your mobile phone to see how to activate this function.
Contact your provider for the current prices and settings.
Attention!
The GSM module is an autonomously working alarm notification device. Wrong
settings or connections can cause undesired SMS to be sent and possibly considerable
costs! Also consider that international sending of messages or commands will cause
further additional costs for your mobile phone as well as for the SIM card inserted in
the GSM module.
Never enter the phone number that belongs to the SIM card that is inserted in the
module in the control software! This may cause the module to send an SMS to itself
during switching. Once this self-sent SMS is received, another answer will be
generated, etc.! This "endless loop" may cause considerable costs!
Ensure good, operationally safe installation. Avoid loose contacts. Sensible threshold
values should be set for sensor input and control. Temperature thresholds like
switching on the heating at 20 °C and off at 21 °C may cause frequent and undesired
switching processes and sending of SMS messages.
Generally, the GSM module can monitor all inputs (sensors) at the same time and
indicate their changes. Commands from the outside can be processed at the same
time. The GSM module processes all events in the order in which they occurred.
This GSM module can be used to send a switching command to another GSM module.
In this case, the second device (message receiver) must not have return answer
activated! Connect the computer initially, try out the desired function and monitor all
messages in the software's STATUS display!
65