Required Steps And Information For Commissioning; A) Software Installation - Conrad GX106 Bedienungsanleitung

10. Required Steps and Information for
Commissioning
Important!
To take the GSM module into operation properly, the following steps must be
performed strictly in the indicated order. Non-observance may lead to functions not
being warranted, configuration being impossible and/or the SIM card being locked by
the GSM module.

a) Software Installation

Before taking up any work at the GSM module, you have to install the control software and the
required drivers on your computer. To do so proceed as follows:
• Place the CD in the appropriate drive of your computer. If auto start is activated on your
computer, the installation will start from CD automatically (programme "setup.bat").
• If auto start is not activated, open the CD's main directory and start the file "setup.bat" by
double-clicking.
• Follow the on the screen instructions.
• Once the control software is installed on your computer, the required drivers must be
installed.
• To install the COM driver ("CP210xVCPInstaller.exe"), observe the notes on your screen.

The current driver versions are available online at www.conrad.com at the respective
product.
• After successful installation, close the control software again.
61