Conrad GX106 Bedienungsanleitung Seite 87

• The message "All data transferred!" must appear.
• Click the "Status" in the control software under "Communication".
• The GSM module has to log on to the network and indicate the condition of all inputs and
outputs.
• Connect a direct voltage between 3 and 12 V/DC after a waiting time of at least 1 minute at
the "IN1" (minus at the left clamp, plus at the right clamp, see chapter 9, figure 1, item 4).
• Once the voltage was applied, the control software must recognise "IN1" as "LOW" within
max. approx. 3 seconds.
• The the output "SMS sent" must appear and the SMS with the entered message text must
be received by your mobile phone.

Matching application examples for use of the inputs "IN1" and "IN2" are available
online at www.conrad.com at the respective product.
87