Useful Features; To Play In Random Order (Random Play); To Play In The Desired Order (Programmed Playback) - Sharp SD-AT50H Bedienungsanleitung

Useful features

SD-AT50H
DX-AT50H
ENGLISH

! To play in random order (random play)

The tracks on the disc can be played in random order automatically.
1
Whilst stopped, press the MODE button
twice.
2
Press the (DVD/CD) button.
To cancel random play:
Press the button.
Notes:
" You may not be able to use this function with some discs.
" When all of the tracks have been played in random play, playback will stop auto-
matically.
" You cannot set the random play whilst in the playback or pause mode.
" Random play is not allowed during programmed playback.
" To check the status during random play, press the ON SCREEN button.
" In random play, the DVD player will select and play tracks automatically. (You can-
not select the order of the tracks.)
E-31
! To play in the desired order (programmed
playback)
You can play back the desired tracks in the sequence you want.
Maximum of 99 tracks can be programmed.
1
Whilst stopped, press the MODE button.
RANDOM
The programming screen is displayed.
2
Enter a track number with the direct num-
ber buttons.
" Repeat the procedure above if you want to enter other track numbers.
" If you enter the wrong number, press the CLEAR button and then reenter.
" When you enter a track number with 2 or more digits:
Example:
To select track 14:
Press ">10", "1" and "4".
3
Press the
" Programmed selections are memorised until a disc is removed.
" Playback is paused with the
grammed playback starts from the point you stopped.
" Pressing the
playback after pressing the MODE button, programmed playback starts from
the beginning.
To change the programmed contents:
Repeat the above procedures from step 1.
Notes:
" Programming cannot be performed whilst paused or in the playback mode.
" Sequence programming does not work with a disc that does not include track
information.
" Sequence programming does not work with a disc that disables programming.
" To exit the programming procedure halfway through, press the RETURN
ton.
" To check the status during the programmed playback, press the ON SCREEN or
the MODE button.
" Even if you press the ON/STAND-BY button to enter the stand-by mode or change
(DVD/CD)
the function from DVD to another, the programmed selections will not be cleared.
PROGRAM TIME 0:00:00 1/1
PROGRAM TIME 8:88:88 1/1
(DVD/CD) button to start play.
button. When playback is resumed, pro-
button twice turns off the programmed playback. If you start
02/8/28 SD-AT50H(H)E4.fm
but-