To Brighten An Image (Black Level Setting); To Change The Angle; To Zoom In On An Image (Zoom) - Sharp SD-AT50H Bedienungsanleitung

Various settings (continued)
SD-AT50H
DX-AT50H
ENGLISH
! To brighten an image (black level set-
ting)
The image can be adjusted during playback.
1
Whilst a disc is playing, press the
BLACK LEVEL button.
2
Within 5 seconds, press the BLACK LEVEL button repeatedly to
select "OFF" or "ON".
OFF Normal image
ON Bright image
E-35
BLACK LEVEL: OFF
Setting

! To change the angle

You can change the angle of view when playing a DVD video disc that contains
scenes recorded from multiple angles.
1
When " " is displayed in the upper right corner of the TV screen,
press the ANGLE button.
2
Within 5 seconds, press the ANGLE button repeatedly to select the
desired angle number.
Notes:
" Some DVDs prohibit changing the angle.
" The angle number is not displayed if angles are not recorded on the disc.
" Refer to the manual of the disc as the operation may vary depending on the disc.

! To zoom in on an image (zoom)

You can magnify images during DVD playback.
1
Whilst a disc is playing, press the ZOOM but-
ton.
Each press of the ZOOM button cycles through the zoom settings as follows:
ZOOM [ 2] ZOOM [ 4]
2
To shift the view and display the de-
sired part of a zoomed image, press
the , , or button repeatedly.
Notes:
" An image may become distorted when zoomed.
" Subtitles cannot be zoomed.
" For the part currently viewed, refer to the indication in the lower right section of the
screen.
02/8/28 SD-AT50H(H)E4.fm
ZOOM [x2]
ZOOM indicator
ZOOM [OFF]