Error Indicators And Warnings - Sharp SD-AT50H Bedienungsanleitung

Error indicators and warnings

When you load an unplayable disc or fail to perform operations properly, the following
messages are displayed on the AV control unit, the DVD player and the TV screen.
AV control unit display
" Place the system away from noise source or plug the
AC power leads to other AC outlets. (*)
" The speaker is not connected properly.
" The amplifier is defective.
Set the system to the stand-by mode and turn the
power on again. (*)
" The amplifier is defective.
Set the system to the stand-by mode and turn the
power on again. (*)
" The amplifier is defective.
Place the system away from noise source or plug the
AC power leads to other AC outlets. (*)
" The cooling fan on the back of the subwoofer/ampli-
fier does not run due to foreign objects caught in it.
Set the subwoofer/amplifier unit to the stand-by
mode and remove the foreign objects around the
fan.
" The digital audio input socket is not connected prop-
erly.
" Unspecified signal is received and cannot be recog-
nised.
" The system connection cable is unplugged.
" The temperature is too high.
Set the system to the stand-by mode and wait a
while.
(*): Should the same message appear even if the DVD player and the subwoofer/am-
plifier unit are unplugged and plugged in or are set to the stand-by mode and on
again, contact your local dealer where you purchased the system.
Meaning DVD player display
Disc Error:
Playback feature may not be available
on this Disc.
Please eject the disc.
Region Error:
Playback is not authorized in your region.
Please eject the disc.
0 1
! Condensation
Sudden temperature changes, storage or operation in an extremely humid environ-
ment may cause condensation inside the cabinet (laser pickup, etc.) or on the trans-
mitter on the remote control.
Condensation can cause the system to malfunction. If this happens, leave the power
on with no disc in the DVD player until normal playback is possible (about 1 hour).
Wipe off any condensation on the transmitter with a soft cloth before operating the
system.
Meaning
" The disc is not loaded.
" The disc is scratched or dirty and cannot be recogn-
ised.
" The disc is loaded up-side down.
TV screen
The disc cannot be played with this system or
it is loaded in an incorrect way.
The region number of the DVD is not 2 or ALL.
The disc does not support the operation de-
scribed in this operation manual.
1 5 / C
8 3 / 0
: 2 3 4 0 :
02/8/28 SD-AT50H(H)E6.fm
SD-AT50H
DX-AT50H
ENGLISH
Meaning
E-52
8