Changing The Initial Setting Of Dvd - Sharp SD-AT50H Bedienungsanleitung

Changing the initial setting of DVD

SD-AT50H
DX-AT50H
ENGLISH
Turn on the TV, and switch the input to the "VIDEO 1" or "VIDEO 2" etc. accord-
ingly.
A new setting will be retained even if the DVD player is set to the stand-by mode. If
you want to restore or change the setting, reset it.
E-19
1
Press the ON/STAND-BY button to turn the power on.
" The startup screen appears.
" If the startup screen does not appear, set the input to "DVD".
" The disc should be stopped at this time.
2
After pressing the button, press the SETUP DVD button.
3
Press the or button to select the menu and press the ENTER
button.
4
Press the or button to change the setting and press the ENTER
button.
Example: "PLAYER MENU" is selected
(The number of repetition depends on the setting item.)
To change other settings, begin from step 3.
5
Press the SETUP DVD button.
The new setting is memorised.
Notes:
" You cannot display the setup screen whilst a disc is playing.
" See page 21 for selecting another language for disc menus.
" The previous screen appears by pressing the RETURN
an item or setting.
02/8/28 SD-AT50H(H)E2.fm
SET-UP
1.LANGUAGE
2.DISPLAY
3.AUDIO
4.PARENTAL
SELECT: SET: ENTER
SETUP RETURN
EXIT: CANCEL:
SET-UP
LANGUAGE CONTROLS
PLAYER MENU
1.ENGLISH
2.FRANÇAIS
3.ESPAÑOL
4.DEUTSCH
5.ITALIANO
SELECT: SET: ENTER
EXIT: SETUP CANCEL: RETURN
Repeat the operation as instructed.
button whilst selecting