Aerial Connection; Tv Connection - Sharp SD-AT50H Bedienungsanleitung

Aerial connection

SD-AT50H
DX-AT50H
ENGLISH
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS
socket and position the FM aerial wire in the di-
rection where the strongest signal can be re-
ceived.
Supplied AM loop aerial:
Connect the AM loop aerial wire to the AM and
GND terminals. Position the AM loop aerial for
optimum reception. Place the AM loop aerial on
a shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
Notes:
" Placing the aerial on the system or near the AC power lead may cause noise
pickup. Place the aerial away from the system for better reception.
" When static is still heard even after adjusting the position of the AM loop aerial, try
reversing the wire connections.
Installing the AM loop aerial:
< Assembling >
External FM or AM aerial:
Use an external FM or AM aerial if you require better reception. Consult your dealer.
AM loop aerial
Note:
When using an external AM aerial, be sure to keep the wire of the AM loop aerial
connected.
E-13
White Black
< Attaching to the wall >
Wall Screws (not supplied)
External
External
15 m (49 feet ) AM aerial
FM aerial
7.5 m (25 feet )
Earth rod
Earth wire

TV connection

Caution:
" Before connecting the TV, turn off all the equipment.
" The TV screen display may be scrambled if not PAL system.
Three types of sockets [VIDEO OUT (VIDEO), VIDEO OUT (S-VIDEO) and COMPO-
NENT VIDEO OUT] are available for TV and DVD player connection.
Connect according to your TV.
! Connecting to a TV with a video input
socket
You can enjoy DVD images by connecting your TV and the DVD player with a video
cable.
TV
Notes:
" Change the TV input in accordance with the connected socket.
" Do not connect other equipment between the TV and the DVD player. If they are
connected via a VCR, pictures may be distorted.
02/8/28 SD-AT50H(H)E2.fm
To video output socket
Video cable
(supplied)
To video input
socket