Herunterladen Diese Seite drucken

Regelgerät Montieren; Wandmontage; Installing The Thermostat; Installation On A Wall - Vaillant VRC 420 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für VRC 420:

Werbung

DE
2 Regelgerät montieren
Das Regelgerät kann direkt im Schalt-
kasten des Heizgerätes oder als Fern-
bedienungsgerät an einer Wand
angebracht werden.

2.1 Wandmontage

Bei Einsatz des Reglers mit Raumtempe-
raturaufschaltung ist zur Wandmontage
folgendes zu beachten:
Der günstigste Montageort ist meistens im
Hauptwohnraum an einer Innenwand in
ca. 1,5 m Höhe.
Dort soll das Regelgerät die zirkulierende
Raumluft – ungehindert von Möbeln,
Vorhängen oder sonstigen Gegenständen
– erfassen können. Der Anbringungsort
soll so gewählt werden, dass weder die
Zugluft von Tür oder Fenster noch
Wärmequellen wie Heizkörper, Kamin-
wand, Fernsehgerät oder Sonnenstrahlen
das Regelgerät direkt beeinflussen
können. Im Zimmer, in dem das
Regelgerät angebracht ist, müssen alle
Heizkörper-ventile voll geöffnet sein,
wenn die Raumtemperaturaufschaltung
aktiviert ist.
GB

2 Installing the thermostat

The thermostat can be installed directly
into the heating appliance or as a
remote thermostat version onto a wall,
remote from the appliance.

2.1 Installation on a wall

When installing the thermostat on a wall,
remote from the appliance, please note
the following:
The best place to fix the thermostat is
usually in a main living area, on an
inside wall at a height of approx. 1.5 m.
The thermostat should be freely exposed
to the circulating air in the room, and
should not be covered by furniture,
curtains or other objects. The exact fixing
place should be chosen in such a way,
that the thermostat is not directly exposed
to draughts from doors or windows, or
direct heating sources such as radiators,
chimney walls, TV's or sun light. In the
room where the thermostat is installed,
radiator valves have to be kept fully
open at all times.
FR
2 Montage du régulateur
La régulation peut être montée
directement dans le tableau de
commande de
l'appareil ou comme
appareil à
télécommande sur
un mur.

2.1 Montage mural

Pour l'emploi de la régulation à
commande de température ambiante, il
faut tenir compte de ce qui suit pour le
montage mural:
Le lieu de montage le plus favorable est
généralement situé sur un mur intérieur
de la pièce d'habitation principale, à
une hauteur de 1,5 m.
C'est là que la régulation doit capter l'air
qui circule dans la pièce, sans que des
meubles, des rideaux ou d'autres objets
ne constituent une entrave quelconque.
Le lieu de montage doit être choisi de
telle sorte que ni les courants d'air
provenant des portes ou des fenêtres, ni
les sources de chaleur tels que les
radiateurs, les parois des cheminées, les
téléviseurs ou le rayonnement solaire ne
puissent influer directement sur la
régulation. Dans la pièce où la
régulation est installée, tous les robinets
des radiateurs doivent être complètement
ouverts en permanence quand la fonction
température ambiante est activée.
55

Quicklinks ausblenden:

Werbung

loading