PR Elecronics 9116 Handbuch Seite 136

LERBAKKEN 10, 8410 ROENDE DENMARK
Module 9116B1
Terminal 51-52, 51-53
Ui 30 V
Ii 120 mA
Pi 900 mW
Ci 3 nF
Li 1 μH
Module 9116B1
Group
Terminal 51-54, 52-54
Uo 28 V IIC
Io 93 mA IIB
Po 650 mW IIA
Module 9116B1
Group
Terminal 51-53
Uo 28 V IIC
Io 1.1 mA IIB
Po 8 mW IIA
Module 9116B1
Group
Terminal 51-52
Uo 8.3 V IIC
Io 0.2 mA IIB
Po 0.4 mW IIA
Module 9116B1
Group
Terminal 41,42,43,44
Uo 8.3 V IIC
Io 13.1 mA IIB
Po 27.3 mW IIA
Installation notes:
For installation in Zone 2, the module must be installed in an outer enclosure having an IP protection
of at least IP54 conforming to the requirements of EN60079-15.
For installation on Power Rail in Zone 2, only Power Rail type 9400 supplied by Power Control Unit
type 9410 (Type Examination Certificate KEMA 07ATEX0152 X) is allowed.
In type of protection "intrinsic safety iD" the parameters for intrinsic safety for gas group IIB are
applicable.
Do not separate connectors when energized and an explosive gas mixture is present.
Do not mount or remove modules from the Power Rail when an explosive gas mixture is present.
If the sensor circuits or loop supply circuits have been installed in a type of protection other than
"Intrinsic Safety", the module shall not be reinstalled in type of protection "Intrinsic Safety"
Revision date:
2010-02-12
Co Lo Lo/Ro
80 nF 4 mH 54 μH/Ω
640 nF 16 mH 218 μH/Ω
2.1 μF 32 mH 436 μH/Ω
Co Lo Lo/Ro
80 nF 1000 mH 4 mH/Ω
640 nF 1000 mH 17 mH/Ω
2.1 μF 1000 mH 35 mH/Ω
Co Lo Lo/Ro
7 μF 1000 mH 100 mH/Ω
73 μF 1000 mH 400 mH/Ω
1000 μF 1000 mH 800 mH/Ω
Co Lo Lo/Ro
7 μF 207 mH 1 mH/Ω
73 μF 828 mH 5 mH/Ω
1000 μF 1000 mH 10 mH/Ω
Version Revision
V5 R0
Module 9116B2
Terminal 51-52, 51-53
Ui 30 V
Ii 120 mA
Pi 900 mW
Ci 3 nF
Li 1 μH
Module 9116B2
Group
Terminal 51-54, 52-54
Uo 21.4 V IIC
Io 93 mA IIB
Po 650 mW IIA
Module 9116B2
Group
Terminal 51-53
Uo 21.4 V IIC
Io 1.1 mA IIB
Po 8 mW IIA
Module 9116B2
Group
Terminal 51-52
Uo 8.3 V IIC
Io 0.2 mA IIB
Po 0.4 mW IIA
Module 9116B2
Group
Terminal 41,42,43,44
Uo 8.3 V IIC
Io 13.1 mA IIB
Po 27.3 mW IIA
Prepared by:
PB
9116QA01
Co Lo Lo/Ro
0.16 μF 4 mH 54 μH/Ω
1.13 μF 16 mH 218 μH/Ω
4.15 μF 32 mH 436 μH/Ω
Co Lo Lo/Ro
0.16 μF 1000 mH 4 mH/Ω
1.13 μF 1000 mH 17 mH/Ω
4.15 μF 1000 mH 35 mH/Ω
Co Lo Lo/Ro
7 μF 1000 mH 100 mH/Ω
73 μF 1000 mH 400 mH/Ω
1000 μF 1000 mH 800 mH/Ω
Co Lo Lo/Ro
7 μF 207 mH 1 mH/Ω
73 μF 828 mH 5 mH/Ω
1000 μF 1000 mH 10 mH/Ω
Page:
2/4