Herunterladen Inhalt Inhalt Diese Seite drucken

Machine Control; Parking The Machine - Ammann AVP 1030 H Betriebsanleitung

Inhaltsverzeichnis

Werbung

Safety regulations
To crank-start diesel engines, note the correct position to the engine and
the correct hand position on the crank.
The handcrank must be turned with maximum force until the engine
::;iarts, otherwise the crank can rebound.
Precisely follow the starting and stopping p'rocedures specified in the
operating instructions and observe indicator lights ..
Starting and operation of the machine in potentially explosive atmo-
spheres is forbidden!
Starting in eclosed spaces, tunnels, mines or deep ditches
Engine exhaust fumes are highly dangerous!
For this reason, when operating the machine in enclosed spaces,
tunnels, mines or deep ditches, it is important to ensure that there is
sufficient air to breathe (see UVV "Construction
work", VBG 37, para-
graphs
40
and
41).
Machine control
Operating devices which adjust themselves automatically when relea-
sed in normal use, must not be locked.
Check protective devices and brakes for proper functioning
prior to
operation.
When reversing, particularly on the edges and banks of ditches, as weil
as in front of obstacles, the machine must be controlled in such a way
that the machine operator cannot fall or be crushed.
Always keep a safe distance away from the edges and banks of ditches
and refrain from any actions wh ich could cause the machine to toppie
over!
Always contral the machine,
===:>0
that hand injuries through hard objects
are avoided!
Always ascend slopes carefu
-::i:Ily
in a direct path.
Reverse up steep slopes to pr~vent
the machine from toppling over on to
the machine operator.
If faults on the safety devicE:3s
or other faults detrimental to the safe
operation of the machine are ....-::1oticed, operation of the machine must be
stopped immediately and the
faults remedied.
When undertaking compacti~n
work in the vicinity of buildings or above
pipelines and similar, check t~e
effect of the vibrations on the buildings
and pipes and stop compacti..c:Jn
work if necessary.
Parking the machine
Park the machine on a firm
a.;rnd
level surface.
Shutdown the drive and seci ~reit
to prevent accidental movement and
unauthorised use. If available:- ~ elose the fuel valve. 00 not place or store
equipment with integrated m~?Ving
ge ar on the chassis. The moving gear
is intended only for transportc:::::::3.tion purposes.
8

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis