Registering The Handset To The Ip-Dect Server - Auerswald COMfortel M-100 Betriebsanleitung

– power socket
Warning: Inappropriate use or incorrect replacement of
the wall wart can result in a life-threatening electric
shock, or can damage or destroy the device.
Only use the wall wart supplied with the equipment.
Note: The handset is supplied with inserted batteries. Charge
your handset batteries for 4 hours before you use the handset for
the first time.
Note: Remove the inner liner of the COMfortel M-100 Charging
cradle if the handset is equipped with the COMfortel M-100 Soft-
cover (optional).
Insert the wall wart into the port at the backside of the char-
1.
ging cradle.
Insert the wall wart plug into a power
2.
socket.
Place the handset in the charging
3.
cradle.
The handset switches on.
At factory state: The menu for re-
gistration at the IP-DECT server
opens (Auto Subscription).
The battery starts charging. The
tery is charging.
Registering the Handset to the IP-DECT
Server
Requirements
– An IP-DECT server connected to the PBX which is already
configured and ready to receive information
– Charged batteries inserted into the handset
– Handset switched on
– A handset which is within range of the IP-DECT server
– Enabled Subscription allowed check box in the IP-DECT
server's configuration manager under Configuration >
Wireless Server
COMfortel M-100 - Instructions V05 06/2017
icon is displayed while the bat-
Commissioning
33