VEVOR RTADB-1 Bedienungsanleitung Seite 8

3. Carefully install the duct divider in the roof opening 5-5/8" from back of roof
opening.
4. Fix the electric control box on the top template and align it with the return air
end of the host. Fix the top template on the ceiling with the fixing screws.
5. Wiring: Connect the main cable and wall control cable to the corresponding
terminals of the electric control box then arrange the excess cable.
6. Install ADB panel. Cover the top template with ADB, align the air inlet with the
host air return port, and fix the screws in sequence.
- 7 -