Troubleshooting - STEINEL HF 360 COM 1 Information

Troubleshooting

Malfunction Cause
L No supply voltage
Light does not switch 'ON'
L Lux setting too low
L No motion detection
L Lux setting too high
Light does not switch 'OFF'
L Stay-'ON' time running out
L Interference from sources of
heat, e.g.: fan heater, open
doors and windows, pets,
light bulb/halogen floodlight,
moving objects
L Stay-'ON' time too short
Sensor switches 'OFF' in spite of
L Light-level threshold too low
persons being present
L Stay-'ON' time too long
Sensor does not switch 'OFF'
quickly enough
Sensor does not switch 'ON' L Reach is reduced when
quickly enough when approached
approached from the front
from the front
L Lux setting too low
Sensor does not switch 'ON' when
persons are present in spite of it
being dark
Remedy
L Check supply voltage
L Slowly increase lux setting
until light switches 'ON'
L Ensure unobstructed sensor
vision
L Check detection zone
L Reduce lux setting
L Wait until stay-'ON' time
elapses; reduce stay-'ON'
time if necessary
L Use stickers to mask out
stationary sources of
interference
L Increase stay-'ON' time
L Change light threshold
L Reduce stay-'ON' time
L Install additional sensors
L Reduce distance between
two sensors
L Sensor deactivated by
switch/button?
L Semi-automatic mode?
L Increase light-level threshold
- 28 -
Disposal
Electrical and electronic equip- EU countries only:
ment, accessories and packaging Under the current European
must be recycled in an environ- Directive on Waste Electrical and
mentally compatible manner. Electronic Equipment and its
implementation in national law,
Do not dispose of electrical and electronic equip-
electrical and elec- ment no longer suitable for use
tronic equipment as must be collected separately
domestic waste. and recycled in an environmen-
tally compatible manner.
Declaration of Conformity
STEINEL Vertrieb GmbH hereby
declares that the HF 360/DUAL
HF radio equipment type con-
forms to Directive 2014/53/EU.
The full wording of the EU Decla-
ration of Conformity is available
for downloading from the fol-
lowing Internet address:
www.steinel.de
Manufacturer's Warranty
As purchaser, you are entitled Making Claims
to your statutory rights against If you wish to make a claim,
the vendor. If these rights exist please send your product com-
in your country, they are nei- plete and carriage paid with
ther curtailed nor restricted by the original receipt of purchase,
our Warranty Declaration. We which must show the date of
guarantee that your STEINEL purchase and product designa-
Professional sensor product tion, either to your retailer or
will remain in perfect condition contact us at STEINEL (UK)
and proper working order for a Limited, 25 Manasty Road,
period of 5 years. We guarantee Axis Park, Orton Southgate,
that this product is free from Peterborough, PE2 6UP,
material-, manufacturing- and for a returns number.
G B
design flaws. In addition, we For this reason, we recommend
guarantee that all electronic that you keep your receipt of
components and cables func- purchase in a safe place until
1 3
tion in the proper manner and the warranty period expires.
Y E A R
that all materials used and their STEINEL shall assume no liabil-
surfaces are without defects. ity for the costs or risks involved
MANUFACTURER'S
in returning a product.
WARRANTY
For information on making
claims under the terms of the
warranty, please go to
www.steinel-professional.de/
garantie
If you have a warranty claim or
would like to ask any question
regarding your product, you are
welcome to call us at any time
on our Service Hotline
01733 366700.
5
Y E A R Y E A R
MANUFACTURER'S MANUFACTURER'S
WARRANTY WARRANTY
- 29 -