Parkside Performance PWSAP 20-Li G7 Originalbetriebsanleitung Seite 5

The warranty is void in the case of commer-
cial use. The manufacturer is not liable for
damage caused by improper use or incorrect
operation.
The device is part of the X 20 V TEAM
series and can be operated with batteries
of the X 20 V TEAM series. Batteries of the
X 20 V TEAM series may only be charged
using chargers of the X 20 V TEAM series.
Scope of delivery/accessories
Unpack the device and check that
everything is present.
Dispose of the packaging material properly.
• Cordless Angle Grinder
• Auxiliary handle (pre-assembled)
• Cutting disc (pre-assembled)
• Guard cover, Attachment
• Chuck key
• Storage case
• Translation of the original instructions
The rechargeable battery and charger are
not included in delivery.
Overview
The illustrations for the device
can be found on the front and
back fold-out page.
Fig. A
1 On/Off switch
2 Handle
3 Rotary dial
4 Battery holder
5 Dust protection grille
6 Auxiliary handle
7 Chuck key
8 Guard cover
9 Cutting disc
10 Direction of rotation arrow
11 Spindle lock
12 Holder (Auxiliary handle)
13 Attachment (Guard cover)
14 Lock (Attachment)
15 Battery release
16 Charge level indicator
17 Button (Charge level indicator)
18 Battery
19 Charger
20 Charging slot
21 Bracket (Keyless chuck)
22 Keyless chuck
23 Mounting flange
24 Uptake spindle
25 Storage case
Fig. B
26 Notch
27 Release lever (Guard cover)
Description of functions
The very fast rotating attachment tool en-
ables clean grinding, cutting or brushing of
metal.
Special attachment tools are provided for
each of the separate applications.
Please refer to the information from the man-
ufacturer.
Please refer to the descriptions below for in-
formation on how the operating elements
work.
Technical data
Cordless Angle Grinder ... PWSAP 20-Li G7
Rated voltage U ..................................20 V ⎓
Protection type ....................................... IPX0
No-load rotation speed n
Weight (without battery) ..................≈ 1.66 kg
Mounting flange ......................... Ø 22.23 mm
Thread .....................................................M14
Thread length of grinding spindle .... ≤ 11 mm
Sound power level (L
WA
Sound pressure level (L
......................................... 85.5 dB; K
Vibration (a ) Angle grinding
h
– Handle ....................2.985 m/s²; K=1.5 m/s²
– Auxiliary handle ......3.627 m/s²; K=1.5 m/s²
Vibration (a ) Abrasive cutting
h
– Handle ....................2.671 m/s²; K=1.5 m/s²
– Auxiliary handle ......3.332 m/s²; K=1.5 m/s²
Battery .................................................. Li-Ion
Temperature .......................................≤ 50 °C
– Charging .......................................4 – 40 °C
– Operation ..................................... 4 – 50 °C
– Storage .......................................15 – 25 °C
GB
IE NI
−1
.........10000 min
0
) 93.5 dB; K =3 dB
WA
)
pA
=3 dB
pA
5