Parkside PAGS 4 A1 Bedienungsanleitung Und Originalbetriebsanleitung Seite 27

1. Connect the USB-A plug
USB-A socket of the charger (not included).
2. Open the protective cover
3. Connect the USB-C plug
USB-C socket
4. Connect the charger to a suitable socket-outlet. The LEDs of
the charge status indicator
LEDs
1 LED lights up
(red)
3 LEDs light up
(red, yellow, green)
5. To stop charging, disconnect the charger from the product
and socket-outlet.
6. Remove the USB cable
7. Close the protective cover
˜ Checking the charge status
Press
5 ] [
o
indicate the charge status:
LEDs
3 LEDs light up
(red, yellow, green)
2 LEDs light up
(red, yellow)
1 LED lights up
(red)
26 GB/IE/NI/MT
[
[
of the product.
7 ] [
8 ] [
. The LEDs of the charge status indicator
of the USB cable
]
.
[ ]
of the USB cable
]
indicate the charge status:
[ 3 ]
Meaning
The battery is being charged.
The battery is fully charged.
from the USB-C socket
.
[ ]
Meaning
The battery is fully charged.
The battery is partially charged.
The charge status is low.
to the
8 ] [
to the
8 ] [
.
7 ] [
3 ] [