Switching On/Off And Cutting; Troubleshooting; Cleaning; Replacing The Cutting Blade - Parkside Pags 4 A1 Bedienungsanleitung Und Originalbetriebsanleitung

Colour
Orange
˜ Troubleshooting
Problem
The product
does not
start.
Bad cutting
result
Meaning
The product is switched on and the cutting
mechanism is activated. The product is ready
for use.
Possible cause
The battery is
discharged.
The trigger
4 ] [
button is defective. Contact our Service
5 ] [
The motor is
defective.
The product is
switched on, but the
cutting mechanism is
not activated.
The cutting blade
is dirty.
The cutting blade
is blunt.
Solution
Charge the battery
(see "Charging the
battery").
or
Centre (see "Service").
Activate the cutting
mechanism (see
"Switching on/off and
cutting").
Clean the cutting
[ 1 ]
blade

"Cleaning").

Replace the cutting
blade
[ 1 ]
"Replacing the cutting
blade").
(see
1 ] [
(see
1 ] [
GB/IE/NI/MT 29