Transport; Storage - Al-Ko Multitool Mt 40 Betriebsanleitung

GB
Malfunction
Motor running, but the saw
chain does not move.
Only sawdust is thrown out,
rather than wood chips. The
pole-mounted pruner must
be forced through the wood.
Appliance vibrates unusual-
ly.
Further malfunctions

9 TRANSPORT

Before transporting, carry out the following mea-
sures:
1. Switch off the tool.
2. Remove the rechargeable battery from the
basic appliance.
3. Separate the basic appliance, extension pipe
(if present) and attachment from each other.
NOTE The nominal energy of the recharge-
able battery is more than 100 Wh. Therefore, ob-
serve the following transport instructions.
The li-ion rechargeable battery contained in the
appliance is subject to the hazardous goods law,
but can be transported under simplified condi-
tions:
■
The rechargeable battery can be transported
on public roads by the private user without
further conditions provided it is packaged for
retail sale and the transport serves personal
purposes.
■
Commercial users who carry out the trans-
port in connection with their main activity
(e.g. delivery from and to building sites, or
demonstrations) can also take advantage of
this simplification.
In both cases, it is essential to take the mandato-
ry precautions mentioned above to prevent any
leakage of the contents. In other cases, it is es-
sential to comply with the regulations of the haz-
ardous goods law. In the case of non-compli-
ance, severe penalties can be imposed on the
sender and possibly the transporter.
Additional notes on transport and shipment
■
Only transport or send the li-ion rechargeable
battery in an undamaged condition.
32
Cause
The saw chain is too taut.
Appliance fault
The saw chain is blunt.
Appliance fault
See "Multitool MT 40 – basic appliance" operating instructions.
■
■
■
■
■
We recommend involving a hazardous goods
specialist in preparation of the shipment. Also
heed any further national regulations.

10 STORAGE

Thoroughly clean the appliance after each use
and – if present – attach all covers. Store the ap-
pliance in a dry, lockable place out of the reach of
children.
Carry out the following jobs before intervals in
work lasting for longer than 30 days:
1. Empty the oil tank for the saw chain oil.
2. Remove the saw chain and guide rail, clean it
3. Thoroughly clean the appliance and store it in
Remedy
Check the chain tension. Retension
the saw chain.
Contact one of the manufacturer's
service centres.
Sharpen the saw chain or contact
one of the manufacturer's service
centres.
Contact one of the manufacturer's
service centres.
For transporting the rechargeable battery, on-
ly use the original cardboard box or a suitable
hazardous goods cardboard box (not re-
quired for rechargeable batteries with a nomi-
nal energy less than 100 Wh).
Tape off exposed rechargeable battery con-
tacts to avoid a short circuit.
Secure the rechargeable battery against
shifting in the packaging to avoid damage to
the rechargeable battery.
Ensure the correct marking and documenta-
tion of the shipment for transport or shipping
(e.g. by parcel service or freight forwarding).
Check in advance that transport with the se-
lected service provider is possible and indi-
cate the shipment.
and spray it with rust-proofing oil.
a dry place.
Transport
CSA 4020