Attaching And Securing The Charging Station To The Wall - Em2Go Pro Power G2 Bedienungsanleitung

Note: Ensure that the SIM card PIN has been deactivated before insertion, otherwise the SIM
cannot be read.
Fig. 5-3 Position of the rear screws

5.1.3. Attaching and securing the charging station to the wall

1. Once the wall bracket is attached to the wall and the mounting plate is attached to the charging station,
hang the charging station at an angle of approximately 20° on the metal plate on the wall.
2. Screw in the two M5X10 screws on the underside of the mounting plate to secure it to the charging
station.
Fig. 5-5 Mounting the EVSE on the wall
SIM
Fig. 5-4 Position of the SIM card slot
GB
47