Installation; Operation - Em2Go Pro Power G2 Bedienungsanleitung

GB

2.3. Installation

2.4. Operation

38
The device may only be installed, adjusted and maintained by qualified persons who
▷
are familiar with the design and operation of this type of electrical equipment.
Failure to observe this precaution may result in serious injury or even death.
The charger must be installed and commissioned by qualified personnel.
▷
Improper installation and testing of the charger may result in damage. No liability is
▷
accepted for any damage resulting from this.
Ensure that the charging cable is correctly positioned during charging and cannot be
▷
stepped on, damaged or subjected to stress.
Check the cable diameter in accordance with local electrical requirements.
▷
The main connection terminal of the charging station must be firmly connected to
▷
the cable ends, otherwise damage to property may occur.
Bare parts of the ends of electrical cables must be insulated; otherwise, dangerous
▷
fires and property damage may occur.
Do not attempt to open, disassemble, repair, tamper with or modify the device. If
▷
you have any questions or require repairs, please contact our customer service
department.
To avoid injury, minors or persons with limited capabilities are strictly prohibited from
▷
approaching the charging station.
Forced charging is strictly prohibited if the electric vehicle or charging station fails.
▷
Do not use the charger if it is defective or shows visible damage.
▷
Do not use the charger when you are in the vehicle.
▷