Configuration Via Cp-Tool App - Em2Go Pro Power G2 Bedienungsanleitung

If you change any parameters, click on the "Set and Reboot" button to save the settings and restart the
charging station.
Note: An explanation of the parameters is displayed when you move the mouse over the
corresponding option.

6.3.2. Configuration via CP-Tool app

The charging station can be configured via the CP-Tool app using a smartphone via the wireless BLE
interface.
1. Activate the Bluetooth function on your smartphone or tablet.
2. Download and install the "CP Tool" app by scanning the QR code or searching for it in the iOS App
Store or Android Play Store.
3. Switch on the charging station and open the app.
4. A list of nearby BLE devices will appear. Search the list for the serial number of the charging station
and tap on it.
5. The app will ask you to enter the password for the charging station.
The default password is 12345678.
6. The app will now display the options to be configured.
You can retrieve the current configuration, set changed parameters and perform other functions.
Below is an explanation of the parameters from the CP-Tool app:
Parameter
WiFi / 4G / LAN
WiFi SSID
WiFi Password
4G APN
4G Account
4G password
IP Address
Subnet Mask
Default Gateway
DNS
Meaning
Activation of respective interface
Priority: 1. LAN, 2. Celular, 3. WiFi
Network identifier of your WiFi network
Network key for your WiFi network
Access point name for mobile communications
Username for mobile access point
Password for mobile access point
IP address for LAN
Subnet mask for LAN
Default gateway for LAN
DNS server for LAN
GB
55