Local Load Management - Em2Go Pro Power G2 Bedienungsanleitung

GB
Authorisation Key
Diode Detection
Power Supply Mode
EV Pause Mode
DLM-485 Address
DLM Maximum Current
LCD Brightness
Note: The default password is "12345678". We recommend that you change this for security
reasons.
If you are unable to log in, please contact our service team at www.EM2GO.de, quoting the magic
number displayed in the CP Tool app.

6.3.3. Local load management

Up to 16 charging stations can be connected via RS485 for local load management, whereby the available
power of the mains (for the charging stations) can be shared.
56
Parameters
LAN DHCP
Server URL
CP Name
Output Current
Charging Mode
Phase Rotation
DLB Mode
Phase Mode
Meaning
When active, DHCP is used for address assignment for LAN
Enter the URL for the OCPP backend
Charge Point ID for OCPP backend
Basic Auth password for OCPP backend
Max. permitted current (in amps) for charging
Authentication selection
APP (RFID & OCPP), RFID only (without OCPP)
or Plug & Charge (without authentication)
Specification of how the charging station is connected
If active, local load management is active
Safety-related function.
Only change if approved by support
Selection of mains type
Three-phase or single-phase charging
Mode when potential-free contact is closed
Station ID for local load management.
0 for master. 1 to 15 for slaves
Max. current (amps) available for all connected
stations
LED/LCD brightness