EM2GO Pro Power G2 Bedienungsanleitung Seite 53

2. Set the static IP address 192.168.1.100 for the network connection to which you have connected the
network cable.
If you are using Windows as your operating system, you can set the IP address as follows:
1. Open "Network Connections" in the Control Panel via the Start menu or by executing the
command "ncpa.cpl".
2. Locate the network connection to which the network cable is connected and open the properties
for this connection.
3. Open the properties of "Internet Protocol Version 4 (TCP/IPv4)".
4. Select the "Use the following IP address" option and enter the value "192.168.1.100" in the
"IP address" field and the value "255.255.255.0" in the "Subnet mask" field, then apply the
setting by clicking "OK" in both dialogue boxes.
3. Open a web browser and enter the address http://192.168.1.10:8080/ in the address bar. The login
screen will be displayed.
4. Enter your user name and password and click on "Login".
By default, the user name is "ROOT" and the password is "root123".
Note: The default password is "root123". We recommend that you change this for security reasons.
for security reasons.
Ple a se Login
Username
Password
Login
Fig. 6-2 Logging in to the web interface
GB
53