Inserting The Sim Card (Optional) - Em2Go Pro Power G2 Bedienungsanleitung

GB
Caution
When working near microchips, always wear ESD protective equipment to prevent damage to the
sensitive electronics.
Risk of electric shock
Ensure that the power cable is not connected to the mains when working on the charging station!

5.1.2. Inserting the SIM card (optional)

1. Disconnect the charging station from the mains.
2. Remove the screws on the front panel.
3. Remove the front panel. Make sure that you do not remove the connecting cables to the front
panel.
4. Insert the nano SIM card with the chip facing downwards and the cut corner to the left until it
clicks into place.
5. Reattach the front panel and tighten the screws.
46
103
ø17
70
72.3
Fig. 5-2 Dimensions of the wall metal bracket
6
ø6x4