Technical Data - Em2Go Pro Power G2 Bedienungsanleitung

GB
charging voltage, current and power during the charging process. The LED strip indicates the status of the
charging station and provides information about the proper charging process. The EM2GO EV charging
station is equipped with intelligent electronics. This provides your vehicle with optimum protection against
overvoltage, undervoltage, fault currents, short circuits and high temperatures.

4.2. Technical data

Nominal voltage
Nominal current
Rated power
MID meter
Authentication
Protocols
Interfaces
Type 2 cable length
Recommended power
supply cable
Compatible cable outer
diameter
Recommended MCB
Recommended RCD
Input terminal
Charging interface
Display
Protective functions
Frequency bands
42
16A
3.7kW (single-phase)
7.4 kW (2-phase)
11 kW (3-phase)
OCPP 1.6-J, ModBus TCP, local load management
RS-485, Ethernet (RJ-45), BLE, WiFi (2.4 GHz/5 GHz), cellular
5×4 mm 2 , copper
13–18 mm
C20
Type A (30mA) 40A
Cable variant: IEC 62196-2, type 2, 3-phase plug
Socket variant: IEC 62196-2, type 2, 3-phase socket
4.3-inch LCD screen, LED strip
All-current sensitive residual current sensor (RCMU) 30mA AC+6mA DC,
overtemperature, over/undervoltage, overcurrent, grounding protection
WiFi: 2.4 GHz/5 GHz
400V, 50Hz
32A
7.4 kW (single-phase)
14.7 kW (2-phase)
22 kW (3-phase)
Accuracy class B
RFID, OCPP
Cable type: 7.5 m
Type 2 socket
5×6 mm
18-25 mm
C40
L1/L2/L3/N/PE
BLE: 2.4GHz
2
, copper