ATOMSTACK A70PRO Benutzerhandbuch Seite 38

05. Make sure that "Auto-home startup" is turned off, otherwise it will
affect the normal use of the resume engraving function
How to use "Resume Engraving" function:
01. Select the engraving file.
02. Using the touch screen controller to move the laser to the
location where the engraving is required
03. Click"Set as bottom left",Set the current position as the initial position
04. Click"Start", the machine will automatically start engraving after
the analysis of the file
01
Touch sound
Turn on/off touch sound
Auxiliary positioning
Turn it on,the red cross indicates the position of the laser
spot,and the real working size will be reduced by a
certain value on both X and Y direction,are you sure to
36
04
02
03
turn on？