ATOMSTACK A70PRO Benutzerhandbuch Seite 37

01
04
02
03
How to use "Autofocus" function in LightBurn and LaserGRBL:
Move the focus point to the top of the engraving object, click the
"Autofocus" button just set to start autofocus
05
Resume Engraving
* Precautions:
01. "Resume engraving" can only be used offline or with mobile APP
02. After turning on resume engraving function, the motor will be
locked, do not forcefully move the laser module by hand
03. Make sure keep the engraving machine and the object to be engraved
without displacement after the power is off, otherwise it will cause the
engraving to deviate;
04. When parsing files during resume engraving, be careful not to plug
or unplug the HDMI cable, otherwise you need to restart
the machine to achieve the function.
35