ATOMSTACK A70PRO Benutzerhandbuch Seite 29

Installation and Use of LaserGRBL Software
LaserGRBL Installation
1. Download and install the software from the LaserGRBL official website or the
link below: https://lasergrbl.com/download/
Connect the Machine to LaserGRBL
1. Plug in the power and USB cable, and turn on the machine.
2. Connect the machine to the computer.
2.1 Open the LaserGRBL software and install the CH340 driver. Restart the computer after installation.
2.2 Confirm the values of "COM" and "Baud".
Driver installation
Driver installation/uninstallation
Select the INF file
Installation
Unload
Help
27