ATOMSTACK A70PRO Benutzerhandbuch Seite 34

Setting PART
Select Language
Tilt Detection
Click to enable the function, when the angle between the
machine and the horizontal plane 15°-20°, the function is triggered.
Machine automatically stops working, prompts "The machine is tilted",
and the buzzer sounds. Tap "OK" on the screen
to dismiss the alarm.
Flame Detection
* Precautions:
01.Sunlight exposure may cause false triggering of functions,
when using the machine outdoor. It is recommended to use it indoors.
Click to enable the function. When a fire occurs directly below the laser
module, the function will be triggered: the laser module automatically
returns to the origin, prompts "Flame detected", and the buzzer sounds.
It can be used normally after restarting the machine.
02.Cutting is not compatible with density board, and the flame alarm
will be triggered when cutting density board.
32