Device Settings - Carl Valentin DUOPRINT Kurzanleitung

Key:
Photocell
Scan position (AP)
Key:
Label error length
Synchronisation
Key:
Flip label
Key:
Rotate label
Key:
Alignment
Key:
Measure label
automatically

Device Settings

Keys: , , ,
Codepage
Key:
External parameters
Key:
Buzzer
Display
Key:
Printer language
Selection of the used photocell.
The selection of one of the following photocell types is possible: transmission photocell normal
and inverse, reflexion photocell normal and inverse
Entry of percental label length by that the label end is searched.
In case an error occurs, indication after how many mm a message appears in the display.
Value range: 1 to 999 mm
On: If a label is missed on the liner an error message is displayed.
Off: Missing labels are ignored, i.e. it is printed into the gap.
The axis of reflection is in the middle of the label. If the label width was not transferred to the
printer, automatically the default label width i.e. the width of the printhead is used. It is
recommended to use labels with the same width as the printhead. Otherwise this can cause
problems in positioning.
According to standard the label is printed ahead with a rotation of 0°. If the function is
activated, the label is rotated by 180° and printed in reading direction.
The adjustment of label is effected only after 'flip/rotate label', i.e. the adjustment is
independent of the functions flip and rotate label.
Left: The label is aligned at the left-most position of printhead.
Centre: The label is aligned at central point of printhead.
Right: The label is aligned at right-most position of printhead.
On: After switching on the printer, the loaded label is automatically measured.
Off: In order to start the measurement procedure you have to change to the corresponding
menu.
Indication of the font used in the printer. The following possibilities are available:
Codepage 437, Codepage 850, Codepage 852, Codepage 857, Codepage 1250, Codepage
1251, Codepage 1252, Codepage 1253, Codepage 1254, Codepage 1257, WGL4.
Please find the tables referring to the above mentionned character sets on our website.
On: Sending parameters such as print speed and contrast via our label creation software to
the printer. Parameters which are set directly at the printer before are no longer considered.
Off: Only settings made directly at the printer are considered.
On: An acoustic signal is audible when pressing a key.
Off: No signal is audible.
Setting of display contrast.
Value range: 35 to 85.
Selection of language in which you want to display the text in the printer display.
At the moment the following languages are available: German, English, French, Spanish,
Portuguese, Dutch, Italian, Danish, Finnish or Polish.
English
DuoPrint
89