Num'axes PROTECTION PIE1150 Gebrauchsanleitung Seite 38

− If you're covering a trail, face the camera down or up the trail.
− Clear out any brush or weeds in front of the camera. These can cause false
triggers due to temperature and motions disturbances in front of the camera
(especially in windy days).
− Check the power level of the batteries before setting up the device.
− Make sure the memory card is properly inserted and have sufficient available
space.
− Make sure the SIM card is properly inserted.
− Make sure to turn the camera ON (switch in the ON position).
11. Technical specifications
Image sensor
Infrared flash
Memory
Lens
LCD screen
PIR sensor
(motion detector)
Capture modes
Photo resolution of
photos recorded on
memory card
Photo resolution of
photos sent to the
application
Multi-shot
Video resolution of
videos recorded on
memory card
Video length
File format
4 MP Colour CMOS
2 invisible IR LED | Wavelength: 950 nm
Infrared flash range: approx. 20 m (65 ft.)
Micro SD card from 4GB up to 128GB maximum
Class 10 minimum
Field of view = 89°
Built-in 2.0" TFT colour screen
Adjustable sensitivity: Low | Medium | High
Detection distance: approx. 20 m (65 ft.)
Detection angle: 60°
Photo | Video
2 MP | 4 MP | 8 MP | 16 MP | 20 MP | 24 MP | 32 MP
640 x 480
Programmable | From 1 to 3 photos per trigger
HD 720P | FULL HD 1080P | 2K
30 FPS (Frames Per Second)
The camera does not send the videos to the mobile
app but it does send the first frame of the video.
Programmable | 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, or
55 seconds, 1, 2 or 3 minutes
Photos: JPEG | Videos: MPEG-4
Guide PIE1150 – Janvier 2026 – ind. A - 38/164