Num'axes PROTECTION PIE1150 Gebrauchsanleitung Seite 37

Password
protection
Default settings
Version info
9.4. View photos/videos on the camera LCD screen
‒ Slide the switch to the SETUP position (the LCD screen will light up), then press
the REPLAY button.
‒ Press the  and  buttons to go from photo/video to photo/video.
‒ Press the REPLAY button to exit.
9.5. Delete photos/videos on the camera
‒ Slide the switch to the SETUP position (the LCD screen will light up), then press
the REPLAY button.
‒ Press the  and  buttons to go from photo/video to photo/video.
‒ Press the MENU button then select "Delete current file" or "Delete all files" then
press OK.
‒ Select "Cancel" or "OK" then press OK.
‒ Press the REPLAY button to exit.
9.6. Transfer photos/videos to a computer
To upload photos/videos on a computer, connect the supplied USB cable to the
camera's USB port and then directly to a main USB port on your computer. The
camera turns on automatically regardless of the selected mode (OFF | SETUP | ON).
The computer will recognize the device as "removable storage".
In the removable storage, you will find the files in the "DCIM" folder and you will be
able to copy them to your computer.
MAC computers show an "Unknown" drive on the desktop. When clicking on this
drive, the program iPhoto is automatically started.
WARNING: Do not disconnect the USB cable or remove the memory card while
copying photos/videos. You could lose files.
10. Setting up the camera
− Mount the camera facing north or south, not east or west as the rising and setting
of the sun could produce false triggers and overexposed images.
ON | OFF
Select "ON" then press OK to enable password protection
for your camera (digits/letters).
No | Yes
Select "Yes" then press OK to reset the camera back to
the factory default settings.
Indicates the firmware version installed in the camera
(firmware, MCU)
Guide PIE1150 – Janvier 2026 – ind. A - 37/164