Num'axes PROTECTION PIE1150 Gebrauchsanleitung Seite 27

Formatting the memory card in the trail camera before using it for the first time is
strongly recommended, especially when the card has been used in other devices. A
memory card formatted in another device may not be compatible.
When the memory card is full, the LCD screen indicates "Memory full".
5. Installing the SIM card
Before inserting or removing the SIM card
(nano-SIM), the camera must be turned
off (switch in the OFF position).
Use the supplied tweezers to insert or
remove the SIM card from its slot.
In SETUP mode, if no SIM card is inserted,
the LDC screen displays "No sim card".
NOTE: The PIE1150 camera only works
with a NUM'AXES Group multi-operator
data SIM card.
6. Attaching the cellular antenna
Screw the antenna onto the socket on top of the camera. Make sure it is securely
attached, but do not over-tighten it.
7. Mobile app
The camera works with a free
mobile app available for Android
and iOS.
This app allows you to adjust all the
device's settings and view the
photos sent by the camera on your
smartphone.
On Google Play (Android) or the
App Store (iOS), download the
TrailCam Go app and install it on
your smartphone.
Open the app and create a user account by following the on-screen instructions.
Guide PIE1150 – Janvier 2026 – ind. A - 27/164